Copper Axial Expansion Joints
Product Code: BAC
EMFLEX axial expansion joints with copper ends are used to absorb thermal expansion in straight pipelines. They are installed with anchors, which are required to withstand the forces of the internal pressure in the bellows. Correct alignment of the pipeline is essential with this type of expansion joint, and proper pipe alignment guides are recommended. Only one axial expansion joint should be installed between each pair of anchors.
Product Type
Info Table
Illustrations
Additional Information
For use on copper pipelines. Suitable for heating circuits and domestic hot water. This unit has stainless steel bellows and Table X BS2871 copper ends.
- Normal Size
- mm
- 15
- 22
- 28
- 35
- 42
- 54
- Axial Compression
- mm
- 25
- 25
- 25
- 25
- 25
- 25
- Installed Overall Length
- mm
- 200
- 210
- 215
- 225
- 230
- 230
- Force to Compress
- Newtons/mm
- 19
- 19
- 26
- 28
- 35
- 60
- Effective Area
- cm²
- 6
- 6
- 8
- 14
- 21
- 35
Typical Installation
Working Pressure: 6 bar (600 kPa)
Test Pressure: 1.5 x Working Pressure
Temperature: 100°C maximum
Material Specifications:
Bellows are stainless steel. For copper service the ends are BS2871 Table X copper tube ends.
Please contact a member of our sales team for more information on alignment and design considerations.
Notice
All axial expansion joints are pre-stressed at the factory and
are supplied at the installation length
+ -
Copper Axial Expansion Joints
N.Minikin & Sons LimitedUnit 2B Brickyard Road, Roecliffe, York, YO51 9NS
Email: enquiries@minikins.co.uk Web: www.minikins.co.uk
Tel: 01423 326 789
01423 326 789
N.MINIKINS & SONS LIMITED
MINIKINS.CO.UK
Copper Axial Expansion JointsProduct Code: BAC
EMFLEX axial expansion joints with copper ends are used to absorb thermal expansion in straight pipelines. They are installed with anchors, which are required to withstand the forces of the internal pressure in the bellows. Correct alignment of the pipeline is essential with this type of expansion joint, and proper pipe alignment guides are recommended. Only one axial expansion joint should be installed between each pair of anchors.
For use on copper pipelines. Suitable for heating circuits and domestic hot water. This unit has stainless steel bellows and Table X BS2871 copper ends.
- Normal Size
- mm
- 15
- 22
- 28
- 35
- 42
- 54
- Axial Compression
- mm
- 25
- 25
- 25
- 25
- 25
- 25
- Installed Overall Length
- mm
- 200
- 210
- 215
- 225
- 230
- 230
- Force to Compress
- Newtons/mm
- 19
- 19
- 26
- 28
- 35
- 60
- Effective Area
- cm²
- 6
- 6
- 8
- 14
- 21
- 35
Typical Installation
Working Pressure: 6 bar (600 kPa)
Test Pressure: 1.5 x Working Pressure
Temperature: 100°C maximum
Material Specifications:
Bellows are stainless steel. For copper service the ends are BS2871 Table X copper tube ends.
Please contact a member of our sales team for more information on alignment and design considerations.
Notice
All axial expansion joints are pre-stressed at the factory and
are supplied at the installation length
01423 326 789
N.MINIKINS & SONS LIMITED
MINIKINS.CO.UK