Catering Equipment Connectors
Product Code: CATG/W
EMFLEX catering equipment connectors are used to enable catering appliances to be moved easily for regular cleaning, in line with legislation for hygiene in kitchens. They are installed between the mains supply and the catering appliance and are finished with a plastic cover which can be easily wiped clean.
Product Type
Info Table
Additional Information
A flexible hose and quick release coupling for use on gas service. This unit has stainless steel hose with carbon steel ends, an integral quick release coupling (15mm, 20mm and 25mm NB only), a smooth yellow plastic shrink fit cover to denote gas, and restraining wire as standard. This unit is both leak-proof and fire-proof and is in accordance with BS669 Part 2, 1997 and is British Gas approved.
End fittings available for TYPE CATG:
1. Fixed male BSP taper thread.
2. Single shut off quick release coupling
Working Pressure: 3 bar (300 kPa).
Test Pressure: 1.5 x Working Pressure.
Working Temperature: 90ºC maximum.
A flexible hose for use on water service. This unit has stainless steel hose and overbraiding with stainless steel end fittings and a smooth white plastic shrink fit cover as standard. A quick release coupling is optional; see type CATQ below. This unit is leak-proof and has all internal surfaces manufactured from material grades accepted by the WRc. This unit can be supplied with a full red, blue or green plastic cover to distinguish between different water services; alternatively coloured bands can be shrink fitted to denote the service.
End fittings available For TYPE CATW:
1. Fixed male BSP taper thread.
2. Fixed female BSP taper thread.
3. Cone seat full male BSP union.
4. Cone seat full female BSP union.
5. Flat face female swivel BSP nut.
6. All above with 90 degree elbow
Working Pressure: 16 bar (1600 kPa).
Test Pressure: 1.5 x Working Pressure.
Working Temperature: 90ºC maximum.
- Nominal Size
- mm
- 15
- 20
- 25
- Minimum Bend Radius
- mm
- 150
- 200
- 225
- Nominal Length 1
- mm
- 500
- 500
- 500
- Nominal Length 2
- mm
- 1000
- 1000
- 1000
- Nominal Length 3
- mm
- 1250
- 1250
- 1250
- Nominal Length 4
- mm
- 1500
- 1500
- 1500
Larger sizes and alternative lengths are available on special request.
(Note larger size CATG not with integral quick release coupling).
Notice:
When installing the hoses do not exceed the minimum bend radius.
Do not stretch or twist the hose.
Do not install where contact can be made with equipment whose temperature exceeds 90ºC.
Do not allow chloride, chlorine or chlorite contamination of the convoluted stainless steel hose wall.
+ -
Emflex
CATERING HOSE/WATER HOSE
N.Minikin & Sons LimitedUnit 2B Brickyard Road, Roecliffe, York, YO51 9NS
Email: enquiries@minikins.co.uk Web: www.minikins.co.uk
Tel: 01423 326 789
01423 326 789
N.MINIKINS & SONS LIMITED
MINIKINS.CO.UK
Catering Equipment ConnectorsProduct Code: CATG/W
EMFLEX catering equipment connectors are used to enable catering appliances to be moved easily for regular cleaning, in line with legislation for hygiene in kitchens. They are installed between the mains supply and the catering appliance and are finished with a plastic cover which can be easily wiped clean.
A flexible hose and quick release coupling for use on gas service. This unit has stainless steel hose with carbon steel ends, an integral quick release coupling (15mm, 20mm and 25mm NB only), a smooth yellow plastic shrink fit cover to denote gas, and restraining wire as standard. This unit is both leak-proof and fire-proof and is in accordance with BS669 Part 2, 1997 and is British Gas approved.
End fittings available for TYPE CATG:
1. Fixed male BSP taper thread.
2. Single shut off quick release coupling
Working Pressure: 3 bar (300 kPa).
Test Pressure: 1.5 x Working Pressure.
Working Temperature: 90ºC maximum.
A flexible hose for use on water service. This unit has stainless steel hose and overbraiding with stainless steel end fittings and a smooth white plastic shrink fit cover as standard. A quick release coupling is optional; see type CATQ below. This unit is leak-proof and has all internal surfaces manufactured from material grades accepted by the WRc. This unit can be supplied with a full red, blue or green plastic cover to distinguish between different water services; alternatively coloured bands can be shrink fitted to denote the service.
End fittings available For TYPE CATW:
1. Fixed male BSP taper thread.
2. Fixed female BSP taper thread.
3. Cone seat full male BSP union.
4. Cone seat full female BSP union.
5. Flat face female swivel BSP nut.
6. All above with 90 degree elbow
Working Pressure: 16 bar (1600 kPa).
Test Pressure: 1.5 x Working Pressure.
Working Temperature: 90ºC maximum.
- Nominal Size
- mm
- 15
- 20
- 25
- Minimum Bend Radius
- mm
- 150
- 200
- 225
- Nominal Length 1
- mm
- 500
- 500
- 500
- Nominal Length 2
- mm
- 1000
- 1000
- 1000
- Nominal Length 3
- mm
- 1250
- 1250
- 1250
- Nominal Length 4
- mm
- 1500
- 1500
- 1500
Larger sizes and alternative lengths are available on special request.
(Note larger size CATG not with integral quick release coupling).
Notice:
When installing the hoses do not exceed the minimum bend radius.
Do not stretch or twist the hose.
Do not install where contact can be made with equipment whose temperature exceeds 90ºC.
Do not allow chloride, chlorine or chlorite contamination of the convoluted stainless steel hose wall.
01423 326 789
N.MINIKINS & SONS LIMITED
MINIKINS.CO.UK